C406-n installation manual

The Artex CN is a single output emergency locator transmitter (ELT) that contains the latitude/longitude information from the aircraft navigation system. Following long message protocol, the MHz transmitter turns on and transmits an encoded digital message to the Cospas/Sarsat satellite system every 50 seconds for milliseconds. During a crash, the . DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL CN / CN HM 2) The cockpit-mounted remote switch assembly is comprised of an ELT status LED and control switch, which allows an operator to monitor ELT status and manually turn on the ELT (i.e., activating) for testing and resetting (i.e., deactivating) the ELT. CN with blade antenna comes with: ELT, rack, remote switch, audio buzzer, blade antenna, coax cable and install manual/kit. The only item that is missing is the wire from the ELT to the remote switch we recommend shielded wiring which we sell.

DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL CN / CN HM Rev. W Company Confidential Page 7 of 92 LIST OF ACRONYMS, ABBREVIATIONS AND DEFINITIONS Term Definition AC Advisory Circular – A Federal Aviation Administration (USA) bulletin with special information. This manual is not intended to be an installation for the ELT system. Use this manual in CN, CN HM ME, MEHM, MEP DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL CN / CN HM Page 8 of 88 FSDO Flight Standards District Office – FAA district offices responsible for aircraft certification, operation, maintenance, and modification issues, approvals and enforcement.

All instructions contained herein refer to Artex ELTs only. Familiarity with Select ELT model (Note: This protocol is supported only by the CN). For purposes of this manual, use of the Blank Programming Adapter () is Figure D-3 shows the wiring interconnection for the ELT using the CN. The RCP must be connected to the ELT via a DIN connector (P/N. S), a Programming Dongle or Dongle IF GPS RS (Refer to. Section Compatibility.