Gefran 800 temperature controller manual






















Use wires of adequate diameter (min. 1mm 2) PT, JPT, PTC • Pt 3-wires 3 1 2 “Raise” and “Lower” key Press to increment (decrement) any numerical parameter •• Increment (decrement) speed is proportional to time key stays pressed •• The operation is not cyclic: once the maximum (minimum) value of a field is reached, the value will not change even if the key . Microprocessor setpoint programmer and controller, format 48x48mm (1/16 DIN). Manufactured using SMT, the instrument provides a complete operator interface, protected by a Lexan membrane that ensures level IP65 faceplate protection. It has 4 keys, two green LED displays, each with 4 digits, 4 red indicating LED's for the 4 logic or relay outputs, and a further 3 LED's . GEFRAN controllers are configurable microprocessor panel instruments that precisely control variables such as temperature, pressure, force, humidity, position, etc., with programmable alarms and optional communication interface PID Controller, 1/16 DIN. Configure. PID Controller, 1/16 DIN. Configure.


USER’S MANUAL For correct and safe installation, follow the instructions and observe the warnings contained in this manual. Type TC Thermocouples (ITS90) Display 2 x 4 digits, green, height 10 and 7mm Keys 4 mechanical keys (Man/Aut, INC, DEC, F) Accuracy % full scale ± 1 digit at 25°C room temperature Main input (settable digital filter) TC, RTD, PTC, NTC. Operator interface Large LCD display with customization of colors assigned to PV and SV display, of color of plastic faceplate, and of logo. Scrolling alphameric display of 25 messages (32 letters each), completely configurable and savable, in three languages. Thanks to language selection and clear scrolling messages for diagnostics, alarms, and process state, the controller speaks the user. Microprocessor controller, format 48x48 (1/16 DIN) manufactured using SMT. The instrument provides a complete operator interface, protected by a Lexan membrane that ensures level IP65 faceplate protection. It has 4 keys, two green LED displays, each with 4 digits, 4 red indicating LED's for the 4 logic or relay outputs, and a further 3 LED's.


Gefran offers a wide choice of PID controllers, from basic models (BASIC) for V. P. OF. Cold, Plastics, Packaging, Laboratory furnaces. Auto-tuning temperature controllers supplied by Southwest Heater Controls Gefran Controller; Gefran Controller; Gefran Controller. CONFIGURABLE 2 LOOP TEMPERATURE CONTROLLER. Main applications J (Fe-CuNi) 0 °C / 32 °F Manual Reset (correction of offset in equilibrium).

0コメント

  • 1000 / 1000